Symphony v32 Flash file Firmware Free All version

Are you looking for Symphony V32 flash file? You are in the right place. Here, we present all version of symphony v32 flash file firmware. It is easy to use. There is no way of failure. Here we use SP flash tool to complete this process. Let’s know how to do it.

Symphony v32 comes with Android 5.1 lollipop version. After long time use, this device becomes slowly and hang many times. To get rid of these problems you need to flash the device. Before start flashing, backup all of the important data. Otherwise, you will lose your important data.symphony v32 frp

Symphony v32 Flash file

How to install Symphony v32 Flash file

Step 1:

Enter the telephone dialer of your symphony v32 and enter the string * # 1234 #. You will be shown the full version of the currently installed firmware. We advise you to take note of it. Make sure once again that the initial code of the downloaded firmware exactly matches the product code of your device (see menu system settings> Device Info> Model Code).

Step 2:

Download the desired firmware package from here. Usually, the firmware is inserted into a .zip, .rar or .7z archive. Then extract the file contained in this archive (e.,g. first image, N7000XXLRQ_N7000DBTLRQ_N7000XXLRK3_HOME.tar.md5) into the same folder where the tool is located.

Step 3:

Do not attempt to extract the individual files that make up the .tar archive. Open the flash file firmware executable. You will see a screen similar to the following (the graphics depend on the version used).Click on the PDA or AP button and select the desired firmware (e.g., I9300XXALF6_I9300ITVALF1_I9300XXLF5_HOME.tar.md5).

Step 4:

Make sure that the file extension is .tar or .tar.md5, they are the only ones allowed.  If you see a .rar, .zip or .7z, it means that it is an archive that is still compressed. Leave all other Odin settings unchanged (only Auto Reboot and F. Reset Time must be active).

Step 5:

Now enter the Device Download Mode. When the phone is off, press the VOLUME DOWN + HOME + POWER buttons at the same time until the phone starts. For tablets without a physical home button, use only the other two.

Step 6:

You will find yourself in front of a screen similar to that of the first image below where you will be asked to click on the Volume Up button to confirm the operation.  Immediately after, you will go to the actual download mode screen.

Step 7:

Connect the phone to the PC using the micro USB cable and wait for the device to be recognized. Now you have to start the installation by clicking on the Start button, without touching any other settings.

Step 8:

In the Message field, you will find the log from where you can follow the various steps of the setup process in real time. The operation will last a few minutes (usually 5-10 minutes, but depends on the size of the firmware).

The device will restart itself to complete some operations. The procedure can be considered successful when Symphony v32 Flash filewill show PASS at the top or the final message <OSM> All threads completed (succeed 1 / failed) in the Message box.

Final thought,

The most common error when working with Symphony v32 Flash file is that the system does not recognize the phone. This is because we have not correctly installed the drivers. From my own experience, I recommend that you review this point very well since it is the one with the most problems.

{1}Symphony v32 Flash file Firmware Free All version

{#}HW1.R612.MB.V2.0 .V15

{#} MediaTek Chipset MT6580

{#} File Size: 758.48MB

Symphony v32 Flash file

{2}Symphony v32 Flash file Firmware Free All version


{#} MediaTek Chipset MT6580

{#} File Size:606MB

Symphony V32 flash file RS615S-V32-V15.0

{3}Symphony v32 Flash file Firmware Free All version


{#} MediaTek Chipset MT6580

{#} File Size:607MB

Symphony v32 Flash file V32-HW2-V17-5.1

Scroll to Top